Rear Bumper - Pro ride
$289.99 CAD
:
Shipped : 1 to 5 days
Note: Make the complete selection of options and then it will be possible to validate the compatibility of your snowmobile by looking in the Compatibility list located further down the page.
If the ''Yes'' option is selected for the sled hitch, it will be installed on the bumper.
Do not pull loads with the handle raised. Use the sled hitch for this application.
The model may be slightly different than the one shown in the photo
Compatibilite
| Manufacturer | Model | Year | |
|---|---|---|---|
| Polaris | 600 RMK LE R 155\" | 2015 | |
| Polaris | 600 RMK Pro LE R 155\" | 2015 | |
| Polaris | 600 RMK Pro R 155\" | 2015 | |
| Polaris | 600 RMK R 155\" | 2015 | |
| Polaris | 800 RMK Assault R 155\" | 2015 | |
| Polaris | 800 RMK LE R 155\" | 2015 | |
| Polaris | 800 RMK Pro LE Terrain Dominator R 155\" | 2015 | |
| Polaris | 800 RMK Pro R 155\" | 2015 | |
| Polaris | 800 RMK R 155\" | 2015 |
| Manufacturer | Model | Year | |
|---|---|---|---|
| Polaris | 600 RMK Pro R 155\" | 2014 | |
| Polaris | 600 RMK R 155\" | 2014 | |
| Polaris | 800 RMK 155\" | 2014 | |
| Polaris | 800 RMK Assault LE R 155\" | 2014 | |
| Polaris | 800 RMK Assault R 155\" | 2014 | |
| Polaris | 800 RMK Pro LE R 155\" | 2014 | |
| Polaris | 800 RMK Pro R 155\" | 2014 |
| Manufacturer | Model | Year | |
|---|---|---|---|
| Polaris | 600 RMK Pro R 155\" | 2013 | |
| Polaris | 600 RMK R 155\" | 2013 | |
| Polaris | 800 RMK 155\" | 2013 | |
| Polaris | 800 RMK Assault 155\" | 2013 | |
| Polaris | 800 RMK Pro R 155\" | 2013 |
| Manufacturer | Model | Year | |
|---|---|---|---|
| Polaris | 600 RMK Pro R 155\" | 2012 | |
| Polaris | 600 RMK R 155\" | 2012 | |
| Polaris | 800 RMK 155\" | 2012 | |
| Polaris | 800 RMK Assault 155\" | 2012 | |
| Polaris | 800 RMK Pro R 155\" | 2012 |
| Manufacturer | Model | Year | |
|---|---|---|---|
| Polaris | 800 RMK Assault 155\" | 2011 | |
| Polaris | 800 RMK Pro R 155\" | 2011 |
This powder coat finish bumper features a raised handle for easier access in deep snow.
It also increases the rigidity of the snowmobile tunnel due to a large contact area.
Stainless steel hardware included.
Because the bumpers are entirely manufactured at our factory, it is possible to ship them in 5 days even if they are listed ''Out of Stock''
Do not pull loads with the handle raised. Use the sled hitch for this application.
The model may be slightly different than the one shown in the photo
PA02-PO-RM-12-155-RE
8 other products in the same category:
$219.99 CAD
Shipped : 1 to 3 days
Compatible with Itek Industries front bumper and the original one
Made of aluminum
Powdercoated
Offers protection over a large area
* Not...
$219.99 CAD
Note: Make the complete selection of options and then it will be possible to validate the compatibility of your snowmobile by looking in...
$289.99 CAD
Shipped : 1 to 5 days
Note: Make the complete selection of options and then it will be possible to validate the compatibility of your snowmobile by looking in...
$69.99 CAD
Shipped : 1 to 2 days
Black Powdercoat Sleigh Hitch for Itek Industries rear bumper for Polaris Pro-Ride, Polaris Axys, Ski-doo XM/XP, Ski-doo Gen4, Arctic Cat...
$249.99 CAD
Made of aluminum
Powdercoated
Protective plate to prevent any debris from getting between the plastics of the snowmobile and the bumper...
$249.99 CAD
Note: Make the complete selection of options and then it will be possible to validate the compatibility of your snowmobile by looking in...
$374.99 CAD
Note: Make the complete selection of options and then it will be possible to validate the compatibility of your snowmobile by looking in...
$69.99 CAD
Sleigh hitch for Itek Industries rear bumper / Polaris Matryx.
Requires no drilling for installation
Black color
Made of steel...